PET polyester nonwovens have:
First, the stability is better than polypropylene non-woven fabric
Mainly manifested in strong, wear-resistant and other properties. Because polyester non-woven fabrics use special raw materials, they are taken out by advanced imported equipment and complicated and scientific processing technology, which has far exceeded the technical content and requirements of polypropylene non-woven fabrics.
Second, heat resistance is better than polypropylene non-woven fabric
PP Nonwoven Spunbond Fabric has obvious heat shrinkage. According to the survey, when the temperature reaches 140 °C, there is obvious shrinkage, while the maximum temperature of polyester non-woven fabric can reach about 230 °C, which has obvious characteristics compared with polypropylene non-woven fabric.
Third, the anti-aging cycle is higher than polypropylene non-woven fabric
Polyester non-woven fabric is made of polyester, which is resistant to insects, abrasion and UV. The above characteristics are higher than polypropylene non-woven fabric.
Fourth, has good breathability
Compared with polypropylene and other non-woven fabrics, polyester non-woven fabrics have excellent properties such as no water absorption, no water contact, and strong gas permeability.
The first is the difference in raw materials: PP refers to polypropylene, that is, polypropylene; PET refers to polyester, that is, polyethylene terephthalate.
100% Polypropylene Non Wovens Fabrics
Secondly, the two kinds of non-woven fabrics have great differences in application, but they can be substituted for each other in some aspects. It's just a difference in performance.
In addition, the two are the same and different in the way of production and processing. Different processing methods determine the final application in most cases. Relatively speaking, PET is a bit high-end and expensive.
What is PE non-woven fabric and PP non-woven fabric? Can it be regenerated?
The material composition is fiber.
The full name of pp is polypropylene, and the Chinese name is polypropylene. Nw is an abbreviation for nonwoven, non-woven or non-woven. It is a non-woven fabric formed by air-jet or mechanically forming a mesh, then subjected to hydroentanglement, needle punching, or hot-rolling reinforcement and finally finishing. Pine means a nonwoven made of pp fiber. Due to the nature of pp itself, the final performance of the cloth is strong and high, but the hydrophilic properties are poor. Usually, the pawn process is spinning into a net, hot rolling reinforcement. Generally, 100% Polypropylene Non Wovens Fabrics are used in a wide variety of applications, including bags, surgical protective clothing, and industrial fabrics.
PE is polyethylene, as understood above.
It can be recycled.
The difference between PP non-woven fabric and polyester non-woven fabric, what are the different uses?
The first is the difference in raw materials: PP refers to polypropylene, that is, polypropylene; PET refers to polyester, that is, polyethylene terephthalate.
Secondly, the two kinds of non-woven fabrics have great differences in application, but they can be substituted for each other in some aspects. It's just a difference in performance.
In addition, the two are the same and different in the way of production and processing. Different processing methods determine the final application in most cases. Relatively speaking, PET is a bit high-end and expensive.
Our company is 100% Polypropylene Non Wovens Fabrics Supplier, welcome to come to us.
Next: 
